Full Room Reception Pictures
I always try to start with a full room photo. However, it can be difficult sometimes if there are too many people in the room, especially when the reception decoration is detailed and the decorators are still making fine adjustments to the setup. When trying to get a full room shot, vendors, family members, walk past the area back and forth, making it extremely difficult to take any pictures.
I always ask people to leave the room or I ask the wedding coordinator for assistance to clear the room. We try to get as many guests out of the picture, as possible.
Once you have a great clean shot, there are a couple of ways to make the picture look interesting. Usually, I start with symmetrical images.
Symmetric composition gives balance to the picture. We do this by putting the camera on the tripod and setting the sharpness to the maximum. I place the camera in the middle of the focal point. The ISO is set to the lowest possible settings and you slow down the shutter speed. (all the way down to 30 seconds). This helps us if there are still people in the room. Slow shutter speed blurs out the movement of people moving around.
After this, I will look for interesting angles and perspectives. I try to take some asymmetric images especially if you want to bring out special features of the room.
Devil in the details
Once we are done with full room photos from different angles, we work on everything else in the room, small to big.
Shoot small details like the flowers or small objects on the dinner table then to the bigger picture, for example, the table with all of the tables. Focus on bright or vibrant colors, it makes the picture very dramatic.
Then we expand the view to show the whole entire place setting, be sure to remove distracting elements that aren’t essential to the overall design. It is easy to make a mistake and take photos of wedding details as they are, especially if you are in a hurry. Stop and ask yourself, is that glass is part of the design or somebody accidentally left it there. Are all the cutlery perfectly aligned? If not, fix them. Realign objects and remove everything if these aren’t essential to the overall layout.
I like starting to shoot the tables in their entirety.
Tables can have the same decoration but sometimes each table has some interesting features. Make sure you capture all the different features or decoration items.
I feature a table with each style to complete that set.
When shooting the tables, look for an angle that gives a sense of depth. One of the best ways to add depth in images is to recreate that realistic three-dimensional feeling.
Try to look for ways to recreate a sense of perspective in your photos. For example, line up the other tables behind the table and then put your focus table in front. If you want to emphasize a personal touch, try to do this by creating leading lines. This creates a lovely composition.
The importance of lighting at any event, especially a wedding, is often underestimated. The photos below have no spotlights on the flower arrangement. The flower setups are almost disappearing into the background. A less delicate decoration with proper uplights and spotlights looks much better than a very expensive design without lighting.
The solution is to consider adding a lighting setup for your decoration. With spotlights on the whole setup would be more three-dimensional and beautiful.
I always try to take photos of the following items:
- Full room shots with different angles
- Greeting signs or decoration in front of the reception room
- If there is a seat assignment table outside of the room
- Full table setup photos
- Sweetheart table
- Wedding cake
- Individual details on the table
- Any special design element custom created for the couple